Compartir
Strengthening Techniques of Reinforced Concrete Cantilever Slabs (en Inglés)
Bassam Abdelsalam Abdelsalam
(Autor)
·
Ayman Hussein Hosny Khalil (Ed ).
(Autor)
·
Ashraf Mohammed Ahmed Heniegal (Ed ).
(Autor)
·
LAP Lambert Academic Publishing
· Tapa Blanda
Strengthening Techniques of Reinforced Concrete Cantilever Slabs (en Inglés) - Abdelsalam Abdelsalam, Bassam ; Hussein Hosny Khalil (Ed )., Ayman ; Mohammed Ahmed Heniegal (Ed )., Ashraf
$ 56.29
$ 66.85
Ahorras: $ 10.56
Elige la lista en la que quieres agregar tu producto o crea una nueva lista
✓ Producto agregado correctamente a la lista de deseos.
Ir a Mis ListasSe enviará desde nuestra bodega entre el
Viernes 28 de Junio y el
Lunes 01 de Julio.
Lo recibirás en cualquier lugar de Estados Unidos entre 1 y 3 días hábiles luego del envío.
Reseña del libro "Strengthening Techniques of Reinforced Concrete Cantilever Slabs (en Inglés)"
There are many problems related to cantilever slabs such as the time-dependent deformation and corrosion problems of steel reinforcement. In addition, the lack of experimental studies on the strength of strengthened cantilever slabs. There is an investigation to evaluate the behavior of reinforced concrete cantilever slabs after strengthening with different techniques. Six medium-scale specimens, divided into three groups, were tested along with a control slab. The first group consists of two specimens that were repaired and strengthened using a reinforced concrete jacket with and without dowels, whereas the second group contained two slabs that were strengthened using two layers of glass fiber reinforced polymer (GFRP) covering 60% and 90% from the cantilever length. The last group involves two specimens strengthened with two steel plates covering 90% of the cantilever length. The steel plates were glued to the surface using epoxy resin. And another was affixed to the concrete surface using expansion bolts. The seven cantilever slabs were modeled using commercial software ANSYS V R15.0 This software is adopted in this study to perform the 3D finite element modeling of specimen.
- 0% (0)
- 0% (0)
- 0% (0)
- 0% (0)
- 0% (0)
Todos los libros de nuestro catálogo son Originales.
El libro está escrito en Inglés.
La encuadernación de esta edición es Tapa Blanda.
✓ Producto agregado correctamente al carro, Ir a Pagar.